AlmatyAstana
EN
Menu Close
Cooler dispenser tap

Cooler dispenser tap

A cooler dispenser tap, a tap for a bottle and a pump with a tap all come down to one thing: pouring water without lifting the bottle.

Message us on WhatsApp

ADVANTAGES

  • up to 59

    minutes — express across the city

  • 34

    cooler models to rent or buy

  • 4.9

    average rating in reviews

  • 220

    mg/L — mineralisation, no limescale

CATALOGUE


What you can order

  • Mechanical pump with a tap

    Mechanical pump with a tap

    A spout on a flexible hose, water dispensed by pressing the top. Comes apart and can be rinsed as a whole.

    4 500 ₸

    Order
  • Automatic USB pump

    Automatic USB pump

    A button instead of pressing: a small motor does the pumping and stops when released. Charges over USB.

    8 900 ₸

    Order

STEPS


How water delivery works in Almaty

From your message to a bottle on the cooler — four steps. Order before 10:00 and we deliver today, in the window you choose: 9–⁠13, 13–⁠17, 17–⁠21.

Start with step one
  1. You message us on WhatsApp

    What you have now: a tap on the appliance or a fitting on the bottle neck. A photo of the removed part next to a ruler answers half the questions. Small parts come with the water, and delivery is free from 2 bottles.

  2. We confirm the time

    We reply within 15 minutes during working hours and agree on a window: 9–⁠13, 13–⁠17, 17–⁠21. Order before 10:00 and it arrives today.

  3. We bring it in one run

    The courier brings the water and the part together, puts the bottle in place and helps fit the pump if you need it. Takes the empty bottle away.

  4. You pay the courier

    Cash, bank transfer or card. Companies get an invoice and accounting documents.

PRICES


Cooler dispenser tap prices in Almaty

Pumps with a tap

Mechanical pump with a tap
4 500 ₸
Automatic USB pump
8 900 ₸

Delivery and service

Delivery with water
free from 2 bottles of 19 L
Free pump
with a first order of 4 bottles or more
Suburbs
from 4 bottles of 19 L
Express
59 minutes

The tap and pump come on the same run as the water — no separate courier visit is needed.

19 L water and coupons

1 bottle per delivery, plus delivery fee
1 590 ₸ + 500 ₸
from 2 bottles per delivery
1 490 ₸
from 5 bottles per delivery
1 420 ₸
from 10 bottles per delivery
1 350 ₸
Coupon 25 per bottle
1 450 ₸ 36 250 ₸ total
Coupon 50 per bottle
1 390 ₸ 69 500 ₸ total
Coupon 100 per bottle
1 330 ₸ 133 000 ₸ total

ESTIMATE


How much water you need

We count by the norm: a litre per person per working day for an office, two litres a day for a home. The price per bottle depends on how many we bring at once, and from 2 bottles per delivery it comes free. We'll settle the exact number in the chat.

The estimate runs in your browser. Message us on WhatsApp — we'll work out the volume and quote a price.

WHY US


Six reasons you can check rather than take on trust.

WHY US?

  • 01 06

    Source and lab control

    Water from a 180 m well in the foothills of the Trans-Ili Alatau, with every batch tested in a lab. The test report is yours on request, not just our word.

  • 02 06

    Clean where hands can reach

    The tank is closed, but the tap sticks out, and that is exactly where a deposit grows. We wash and disinfect the bottles on every round, and we are straightforward about the spout: you clean it, once a month and without abrasives.

  • 03 06

    Delivery window, right away

    Order before 10:00 and we deliver today, in the window you choose: 9–⁠13, 13–⁠17, 17–⁠21. Urgent — express in 59 minutes. Hours: Mon–⁠Sat 9:00–⁠21:00, Sun — closed.

  • 04 06

    Our own couriers, not contractors

    The same people deliver every time — they know the courtyards, the intercoms and that the bottle goes all the way to the kitchen.

  • 05 06

    Regular delivery on a schedule

    Weekly, fortnightly or monthly — we come on our own, no reminders needed. One WhatsApp message changes the schedule.

  • 06 06

    Matched from a photo, not by model name

    A photo of the removed tap next to a ruler — and the part is found in the chat in a minute. No personal account, no passwords and no calls to “clarify the details”.

Bottling line: 19-litre bottles moving along the plant conveyor

QUALITY


What's in the bottle

The figures come from a lab report, not a brochure. The test date is shown: if it is more than three months old, ask for a fresh one — from us or from any supplier.

Mineralisation (TDS)
220 mg/L
pH
7.2
Hardness
1.8 meq/L
Tested on
14.08.2026

Request the report on WhatsApp

PEOPLE


Who delivers

Couriers are assigned to districts: the same person comes every time, not a random driver.

  • Atam M., Water delivery driver

    Atam M.

    Water delivery driver · experience 8 years

  • Saidakbar A., Driver-forwarder

    Saidakbar A.

    Driver-forwarder · experience 22 years

  • Almagul N., Logistics dispatcher

    Almagul N.

    Logistics dispatcher · experience 19 years

  • Aruzhan A., Customer service manager

    Aruzhan A.

    Customer service manager · experience 13 years

  • Asylzhan S., Filtration systems diagnostician

    Asylzhan S.

    Filtration systems diagnostician · experience 29 years

  • Vasiliy Ts., Water filter service engineer

    Vasiliy Ts.

    Water filter service engineer · experience 12 years

  • Yerlan N., Water cooler repair technician

    Yerlan N.

    Water cooler repair technician · experience 20 years

  • Mikhail N., Street-washing machine driver

    Mikhail N.

    Street-washing machine driver · experience 15 years

  • Nurkhat G., Water treatment specialist

    Nurkhat G.

    Water treatment specialist · experience 10 years

REVIEWS


Reviews of our water delivery in Almaty

4.9 based on 24 reviews on the website

All reviews
Leave a review

Tell us how the delivery went — it helps us keep standards up, and other customers can see it.

All fields are required — the message is put together from them.

Rating From one star to five

Your review goes out as a WhatsApp message — that way we know whom to reply to, and we do not collect your data on the website.

  • Aigerim

    Ordered in the morning, it arrived by lunchtime. Atam carried it up to the 4th floor with no lift and wasn't even out of breath. The water is fine, no aftertaste.

  • Dmitry

    All spot on: two bottles, free delivery. Paid the courier by card right there, he had a terminal with him.

  • Olga

    For three years we had water delivered by others, and every time it was a lottery — either they'd turn up at nine in the evening or forget to take the empties, and they'd pile up on the balcony six at a time. We switched here after a neighbour recommended it. The first thing I liked was that they ask how many empty bottles to take away. A small thing, but that used to be a constant mess. They deliver in the window I choose and have never moved it once. The water is soft, the kettle is still clean after six months, which is rare for our area. Now I order on a schedule, four bottles every two weeks. The only thing — the first time I didn't understand how the bottle deposit works and had to ask again. But they explained it calmly, without the usual “read it on the website”.

    Reply from aqua365

    Olga, thank you. After questions like yours we put an explanation of the deposit right on the product card — it's clearer now.

  • Serik

    Water is good, they deliver on time. We've been ordering for the office for six months now, not a single problem.

  • Assel

    I ordered express because we had guests and ran out of water. They came in just over an hour — the promise was 59 minutes, it was closer to seventy. Not a big deal, but if you promise, it should be exact. No complaints otherwise: the courier was polite, put the bottle on the cooler himself and took the empty one.

    Reply from aqua365

    Assel, thank you for being honest. That day there was an accident on the road in your area — we usually make it in time, but we should have warned you.

  • Nurlan

    We took a coupon for 25 bottles, did the maths — it works out noticeably cheaper than buying one at a time. One message and they deliver, no need to place the order from scratch each time. We bought the cooler from them too, it runs quietly. All in all a decent company, I recommend them.

  • Gulmira

    Good quality water, delivered on time. The courier was a polite young man, he swapped the bottle himself and took the empty one away. Thank you.

  • Aigul Smagulova

    I was wary placing my first order: no basket, no sign-up, I just wrote on WhatsApp how many bottles and where. They replied within about ten minutes and gave me a delivery window straight away. That's how I order now.

  • Tatyana

    Our previous supplier brought bottles with dust on the neck, there's none of that here. Nice that they wipe them.

  • Marat

    They gave me a pump as a gift for ordering 4 bottles or more, I thought it was some kind of scam. Nope, they really put it in, boxed.

  • Aliya

    I rented a cooler, they brought it the next day and set it up right away. They showed me how to change the bottle without spilling. Really convenient that servicing is included in the rental — you pay 2 500 ₸ and don't have to think about anything else.

  • Yekaterina

    Once they moved my window from daytime to evening, though they did warn me in advance. Otherwise deliveries are steady and the water tastes good.

  • Zhanna

    I'll go into detail, because I spent a long time choosing myself. We're a small office, eight people, and water goes fast — about a bottle a week, more in summer. We worked it out with the calculator on the website, it showed eight or nine bottles a month, and that's exactly how it turned out. We took a coupon for 50 and got a dispenser with it, which came in handy — our old cooler had just started leaking. Aruzhan set up the invoice in fifteen minutes, the documents arrived by email the same day, and our accountant was happy. They always deliver in the first half of the day, as agreed. They take the empties. Not a single slip-up in a year, and before that we'd changed suppliers twice.

    Reply from aqua365

    Zhanna, thank you. Glad the dispenser arrived just in time.

  • Roman

    Two bottles delivered in 50 minutes, I didn't even have time to do the dishes. Fast.

  • Balnur

    We ordered 12 bottles for the office. Delivered on time, and the invoice went straight to accounts. Almagul sorted everything out quickly, no need to get back in touch.

  • Igor

    I bought this water for my coffee machine. The previous one, from the shop in five-litre jugs, was killing the boiler — within a year I had to take it in for cleaning, the technician said limescale. Here the stated mineralisation is 220 mg/L, and honestly I was sceptical. Eight months on, I took the water inlet apart for maintenance — clean. The coffee also tastes more even, by the way, though that may be my imagination. I order four bottles at a time, which lasts about a month, and half of it goes on coffee. I'll also mention that the couriers don't drop the bottle at the door but carry it into the kitchen — that matters to me, my back won't let me haul them.

  • Kamila

    Aruzhan helped me work out which cooler to get for a small kitchen, suggested a desktop one, and she was right — a floor-standing one wouldn't have fitted.

  • Timur

    On the morning of the thirty-first we discovered there was no water at all, with guests coming at six. I wrote on WhatsApp, they replied in about five minutes and delivered by two. They saved the party, to be honest. Same price as on a normal day, no surcharge for the rush.

  • Natalya

    We use this water for baby formula, our paediatrician approved the composition. They bring it together with the regular bottles, no extra charge for delivery.

  • Yerzhan

    All good. Placed the order with one WhatsApp message, and they checked the entrance and the intercom code in the same chat.

  • Saltanat

    The bottle arrived scuffed on the sides, though the water was clean and had no smell at all. I understand the bottles are reused, but it doesn't look great. Everything else was fine — delivered on time and carried in.

    Reply from aqua365

    Saltanat, the scuffs on the bottle are marks from washing, they don't affect the water. But we did swap the bottle on the next delivery.

  • Maxim

    We're a manufacturing company, thirty-two people in the workshop and office, and in summer the water simply flies. Before this we worked with a big supplier, but their minimum was twenty bottles and their schedule was “whenever we can”. Here we agreed on regular delivery twice a week, ten bottles each time, and that settled the matter completely. Yerlan came himself to see where to put the coolers and suggested three spots instead of two — he was right, there are no more queues at the machine. Invoices come without reminders, and the paperwork arrives with the water. Once their van broke down on the way; they wrote to us themselves, apologised and delivered first thing the next morning. That honesty wins me over more than any discount.

    Reply from aqua365

    Maxim, thank you. Our apologies once more for that hiccup — there is now always a spare van on the route.

  • Aruzhan

    I've been ordering for three years now, and their price has gone up less than everyone else's. That says something too.

  • Sergey

    When I moved, I decided not to drag the bottles along — I returned them to the courier and got my deposit back in cash, no questions and no “come to the office”. A month later I signed up again at the new address, same as before. It's nice when a company doesn't try to hang on to other people's money.

COVERAGE


Where we deliver

Every district of Almaty. Suburbs by arrangement, with delivery from 4 bottles.

Delivery terms

Order before 10:00
delivered today
Time windows
9–⁠13, 13–⁠17, 17–⁠21
Express
59 minutes
Day off
Sunday
Suburbs
from 4 bottles
Delivery
free from 2 bottles

A single bottle is 1 590 ₸ plus 500 ₸ for delivery. Suburban routes are agreed when we confirm the order. Hours: Mon–⁠Sat 9:00–⁠21:00, Sun — closed.

Check your district on WhatsApp

ARTICLE


More on this topic

A bottle tap and a cooler tap — one part, two places

Price lists use the word “dispenser” for two different parts, and the mix-up happens with almost every order. The first is the tap on the appliance body: two buttons or two levers, blue and red. The second is a fitting for the bottle neck that lets you pour water with no appliance at all.

They do the same job: let out a portion of water and shut off so that nothing drips. The only difference is what the part is screwed onto. So when you write to us “I need a dispenser for my cooler”, add one word of detail: has the tap on the appliance broken, or do you want to pour straight from the bottle?

The second part has plenty of everyday names: a tap for a water bottle, a bottle tap, a spout. Behind all these words is the same product.

Price lists keep the confusion going. Both appliance sellers and accessory sellers use one word for them, because for the buyer both parts make the same movement. One clarifying question in the chat sorts it out, and we always ask it — otherwise a person whose cooler is leaking would receive a bottle-neck fitting.

The third case is rarer and therefore more annoying: on some appliances the dispensing unit is not removable at all — the button is on the panel and the valve sits inside the body. Such a tap is not sold as a separate part, and the problem is solved by a service visit, not by buying a small part. You can tell in advance: if there is no nut under the spout and the body cannot be taken apart by hand, there is no point looking for a replacement.

Four types of dispensing unit

The dispensing unit has been reinvented many times, and today four types are found on appliances and on bottles. They differ in the movement that opens them, and this is not a matter of taste: the movement decides whether a child can open the tap and how much water ends up on the floor if someone leans on it.

Types of dispensing unit and their weak points
TypeHow it opensWhere you find itWeak point
Flag leverpushed up or to the sideolder appliances and budget rangeseasy to catch with an elbow or a glass
Push buttonpressed with a cup or a palmmost models todaythe spring weakens, the button sticks
Rotary tapturned a quarter turnbottle fittings, household containersthe thread gets overtightened and the body warps
Valve with a latchpressed and latched while fillingbottom loading, water heaterspeople forget to release the latch and the water keeps running

The hot side always differs from the cold one, and not just in the colour of the cap. It has a safety feature: either a second lock you press together with the lever, or a shutter that blocks access. In a home with children, this is the one part of the dispensing unit that decides the choice of the whole appliance.

People ask more and more about touchless taps with a sensor. They exist, and in a public place they make sense: nobody touches the appliance with their hands. At home and in a small office they lose to a simple button — the sensor needs power, reacts to anything in its field and pours its own portion rather than yours.

The portion differs between the four types, and in the kitchen you notice it. A lever and a button pour while held; a rotary tap stays open by itself; a latched valve pours until switched off. The first two forgive inattention, the other two do not: a tap left open empties the tank onto the floor, and this usually happens once, after which people stop using the latch altogether.

There is also an everyday detail nobody thinks about in the shop: what you actually press with. A button is easy to push with the edge of a cup, so your hand never touches the tap — good for hygiene and bad for the button, because ceramic knocks against plastic. In this sense a lever is more honest: you take it with your fingers, and wear happens where it should.

The bottle tap: how it holds and why it starts to leak

The design is almost embarrassingly simple: a threaded body, a spring-loaded stem and a silicone gasket that does all the work. The gasket presses against the seat and holds the water back, the spring returns the stem. Everything that breaks in this unit is the gasket.

Hence the three reasons a tap starts to drip. First, the gasket has hardened with age or from hot water. Second, a crumb of limescale or a grain of sand has got under it, and the seat no longer closes. Third, the fixing nut was overtightened during installation, the body warped and the seal sits at an angle.

Such a joint is only ever tightened by hand: until it touches the gasket, plus a small extra turn. A spanner, pliers and “all the way” are out of the question here — the plastic thread is not designed for leverage, and an overtightened body cracks not the same day but a month later, usually at night and usually with a full tank.

The fix goes in reverse order: first loosen it and retighten by hand, then take it off and rinse it, and only then replace the part. Putting a glass under a dripping tap and waiting for it to stop by itself is not worth it: the water goes into the drip tray, and sooner or later the drip tray overflows onto the floor.

What it is made of and what difference that makes

The body is made of food-grade plastic, the stem of the same plastic or of stainless steel, the seal of silicone or rubber. The combination sets both the price and how the part copes with hot water.

  • A plastic body with a steel stem is the working majority: inexpensive and lasts for years if you do not overtighten the nut.
  • A silicone seal handles hot water better than rubber and does not give the water a taste; rubber hardens faster and is the first to let water through.
  • An all-steel tap is fitted to water heaters and catering appliances: pricier and heavier, but it fears neither boiling water nor disinfection.
  • Clear plastic looks nice but does not last: in the light it turns cloudy and cracks along the thread, and a deposit in it only shows once there is a lot of it.
  • The flexible silicone hose on fittings is a consumable in itself: within a couple of years it yellows and loses its softness.

There is one detail descriptions never mention — the thread and its pitch. Each manufacturer has its own, and that is exactly why a part from someone else’s appliance almost never fits yours. What matters is the seat diameter, the stem length and the shape of the seat, and such things cannot be matched blindly.

The second thing nobody mentions is the temperature limit. Water from the hot tank comes out at nearly 90 degrees, and a cheap seal lasts months at that temperature, not years. That is why the hot tap is replaced on average twice as often as the cold one, and that is normal wear, not a faulty batch.

A spare part in the drawer costs less than a technician’s visit and saves you a day without water. The logic is the same as with light bulbs: the dispensing unit is the appliance’s only consumable, and you will not know in advance when it starts to leak. That is why offices buy the second part straight away, together with the first replacement.

A water pump with a tap: when the dispensing unit is a separate device

If there is no appliance at all, the tap comes together with a fitting for the bottle neck. A water pump with a tap works like this: the tube goes down to the bottom of the bottle, the water is drawn by pressing the top or a button, and it comes out through the same kind of spout with a gasket. The mechanical one costs 4 500 ₸, the automatic one 8 900 ₸.

The difference between a fitting with a spout and one without is how the hose ends. Without a spout, the flow is stopped by lifting the hose or pinching it with a clip, and that works only as long as someone remembers to do it. A spout with a gasket does the same thing by itself and therefore wears out: that is the price of not having to think about where the hose is every time.

A separate word on a search that comes up more often than the product itself. A water pump with cooling is an almost mythical thing: water can only be chilled by a compressor or a Peltier element, and those need a housing, a radiator and a socket. All of that together is called a cooler. A fitting on the bottle neck gives no cold and cannot, and a seller who promises otherwise is selling you hope.

You can still get cold water without an appliance, just another way. Keep the full bottle somewhere cool rather than by a radiator or in the sun; pour a litre or a litre and a half into a jug and put it in the fridge; add ice to the glass in summer. It is all dull and it works, unlike a fitting that promises cooling.

Pouring height, drip tray and stability

The tap decides how the water comes out. Where it stands is up to you, and that matters more than it seems until the first week is over.

A bottle on the floor keeps the spout a hand’s height off the ground: you crouch to hold a glass under it, and a saucepan will not fit under it at all. A stand or a low cabinet lifts the neck to knee or table height, and pouring becomes an ordinary movement rather than an exercise. The stand costs 7 900 ₸ and pays for itself the first evening someone makes soup.

  • A level floor: a water bottle on an uneven surface rocks, and the tap drips at every touch.
  • Twenty centimetres of free space in front of the spout — otherwise neither a jug nor a saucepan will fit under it.
  • A tray with a rim under the spout: drips are inevitable, so let them collect in one place.
  • Not by a radiator or in direct sunlight: warm water spoils faster, and plastic turns cloudy.
  • Not in a walkway: people kick the bottle, and one day that ends with a spout torn off.

The drip tray deserves a word of its own. On appliances it is built in and holds about a litre, while a bottle with a fitting has none at all — a kitchen towel that nobody changes plays the part of the drip tray. A tray with a rim solves two problems at once: you can see how much has dripped, and you know when it is time to check the seal.

And about children. A spout at knee height is within reach of a child of any age — that is both a convenience and a reason not to put hot water at that height. Bottle fittings do not dispense hot water at all, and that is where their safety lies.

A separate word on a spare bottle nearby. A full bottle next to the one you pour from saves a trip to the storeroom, but it takes up the very twenty centimetres you need in front of the spout. The rule is simple: keep the spare to the side or behind, and leave the space in front of the tap empty — that is where the work happens.

Tap hygiene: the only part people touch with their hands

The water in the tank is protected, but the tap sticks out, and hands, glasses and dust all reach it. It is on and under the tap that a deposit most often grows, which is later blamed on the water quality. Once a week wipe the outside of the spout; once a month take it off and rinse it in warm water with baking soda, without abrasives or bleach.

Two rules that save money later. Do not press a cup right up against the tap — the rim of the glass rubs the spout and chips its edge. And put nothing in the tank but water: tea, fruit drinks and lemon leave a film on the gasket that cold water will not wash off.

A short word on cleaning products. Warm water and baking soda clean off everything that grows on the dispensing unit in a month. Abrasive powders scratch the seat, and afterwards the part starts leaking where it used to hold; chlorine-based products dry out the silicone and leave a taste that takes a week to get rid of. Vinegar is fine against limescale, but afterwards the part is flushed through with water, not just rinsed.

You check the dispensing unit with your finger: run it along the inner edge of the spout. A slippery deposit is biofilm, and it grows on everyone’s taps regardless of water quality, because it is warm, damp and there is air. There is nothing alarming about it appearing; the only bad thing is leaving it for months. Baking soda once a month, and the matter is closed.

There is a second place where hands and water meet — the neck of a reusable bottle held under the tap. It touches the spout more often than any glass and gets washed less. If you have one such bottle that goes everywhere with you all day, wash it daily, or the tap will have nothing to do with the problem.

Replacing the tap: what to remove, what to show and what to order

The thread on appliance taps is close to standard but not identical: the diameter, stem length and seat shape vary between ranges. So the order is: shut off the appliance, drain the rest through the second tap, unscrew the part by hand and photograph it next to a ruler. From a photo the part is matched in a minute; blindly, almost never.

As a separate spare part a tap is inexpensive, and in this sense water with a dispenser is cheaper than it seems: the appliance lasts for years, and its only consumable turns out to be one plastic part. Replacing it whole is usually easier than hunting for a separate gasket of the right diameter.

The part lasts differently, and the calendar has nothing to do with it. The cold side lasts for years, the hot side noticeably less, and what decides it is not age but how it was treated: a nut overtightened during installation kills the body in a month, and a habit of pressing the glass right up against it chips the spout edge in a season.

You replace the part yourself, and no tools are needed: a cloth, a bowl and ten minutes. A technician is called in two cases — when the unit is not removable and when it is not the tap leaking but the tank behind it. You can tell the second by water appearing while the tap is closed and the drip tray is dry.

Before you buy: what to measure and what not to buy

There is almost always one mistake when buying: the part is chosen by the appliance name rather than by its dimensions. Then come the messages with the seller, a return and a second purchase that costs more than the first.

  1. Shut off the appliance and drain the rest through the second tap.
  2. Unscrew the part by hand; there is usually a plastic ring under the nut — do not lose it.
  3. Measure the seat diameter, the stem length and how far the spout sticks out.
  4. Photograph the part next to a ruler, from both sides.
  5. Send the photo and the three numbers to the chat — with them a replacement is matched in a minute.
What happened and what it means
SignUsual causeWhat to do
Drips after closinga crumb of limescale under the sealremove, rinse, refit
Still drips after rinsingthe seal has hardenedreplace the whole part
Leaks along the thread, not from the spoutthe nut was overtightened, the body warpedloosen and retighten by hand
The button sticksthe spring has lost its travelreplace the whole part
The water comes out in a thin streamthe spout is clogged with depositrinse in warm water with baking soda
A new part tastes of plasticit was not flushed after installationrun off two or three litres and do not drink the first portions

And a short list of what is not worth buying. A part without a sealing ring in the box: there will be nothing to fit it with. A listing that says “universal, fits all” without a single dimension in the description — fittings for a standard bottle neck can be universal, appliance taps cannot. And the cheapest listing with someone else’s photo: the dispensing unit is inexpensive anyway, the saving here is measured in small change, and the price you pay is a puddle under the appliance.

It is worth noting the replacement date where you note your water orders. The dispensing unit gives no warning and does not break on schedule, but knowing that the last part lasted a year and a half, you buy the next one calmly and in advance, not on the day the floor under the appliance is wet.

A water bottle with a tap: a ready-made set

The shortest way to water without an appliance looks like this: a bottle, a fitting with a tap and a stand that raises the neck to glass height. A water bottle with a dispenser in this form takes up a corner of the kitchen and needs neither a socket nor any maintenance beyond rinsing the spout.

The set is put together once and then looks after itself: the courier swaps the bottle, the fitting moves from bottle to bottle, the stand stays where it is. The only running cost is the water, the only maintenance is rinsing the spout once a month. For a kitchen where cold water is not a must, that is the whole kit.

We bring all of this in one run together with the water: delivery across the city is free from 2 bottles, an order placed before 10:00 usually goes out the same day, the delivery windows are 9–⁠13, 13–⁠17, 17–⁠21, and there is one day off: Sunday. Message us on WhatsApp with what you have now, and we will tell you whether you need a spare part or a separate fitting.

In short

  • “Dispenser” is used for two different parts: the tap on the appliance body and the fitting for the bottle neck.
  • The only thing that wears out in a tap is the silicone gasket; it drips for three reasons, and two of them are fixed by rinsing.
  • A fitting on the bottle neck does not and cannot chill the water — only an appliance with a radiator and a socket can do that.
  • The tap is cleaned once a month: it sticks out, and that is exactly where a deposit forms.
  • A replacement part is matched from a photo of the removed tap, not by the model name.

QUESTIONS


FAQ

Do I need a tap for the appliance or a fitting for the bottle — how can I tell?

The word “dispenser” is used for two different parts. If something on the cooler body leaks or has broken, you need a spare part for it; if there is no appliance at all and you want to pour straight from the bottle, you need a fitting for the neck.

The tap on my cooler is leaking. Is it faulty?

Almost never. First loosen and retighten the nut by hand, then remove the part and rinse the gasket — crumbs of limescale get under it. If it still drips after that, the tap is replaced as a whole.

Will a tap from another appliance fit?

Only if the thread, diameter and stem length match: they differ between ranges. Unscrew yours, photograph it next to a ruler and send the photo to the chat — from a photo the part is matched in a minute, blindly almost never.

How often should I clean the tap, and with what?

Wipe the outside of the spout once a week; once a month take it off and rinse it in warm water with baking soda. Abrasive powders scratch the seat, and chlorine-based products dry out the silicone, so the gasket starts to leak.

Is there a fitting that chills the water?

No. Cooling needs a compressor or a Peltier element, a radiator and mains power — such a device is called a cooler, not a fitting.

Do I need a stand if I pour straight from the bottle?

Usually yes. A bottle with a fitting stands on the floor, and you have to hold the glass right down by the floor — a stand or a cabinet raises the neck to a comfortable height.

Message us